53
EXTERNAL EQUIPMENT SETUP
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image
is still not correct, try using the manual settings or a different resolution or refresh rate on the PC.
Auto Configure
1
Select PICTURE.
2
Select Screen (RGB-PC).
3
Select Auto Config..
4
Select Yes.
5
Start Auto Configuration.
ꔛ
If the position of the image is still not
correct, try Auto adjustment again.
ꔛ
If picture needs to be adjusted again
after Auto adjustment in RGB-PC,
you can adjust the Position, Size or
Phase.
Auto Config.
Resolution
Position
Size
Phase
Reset
Auto Config.
Yes No
SCREEN
ꔂ Move ꕉ Prev.
PICTURE
ꔂ Move ꔉ Enter
ꔀ
ꔉ
• Tint 0
• Color Temp. 0
• Advanced Control
• Picture Reset
• TruMotion
• Screen (RGB-PC)
• LED Local Dimming : On
RG
WC