2009 FALL LCD DV 42LH50
38
T
T
-
-
CON (TFT Drive) PWB Removal
CON (TFT Drive) PWB Removal
Remove the 3 Screws in the T-CON
shield and remove the shield
CN5 CN4
Disconnect CN1, CN2, CN4 and CN5.
See next slide for details about removing cables.
The two screws shown in the picture
below are for the Service Position.
They would have been removed
when removing the shield.
Be sure to reinstall them if
servicing the T-CON PWB.
CN1 CN2
STEP (1)
STEP (2)
To Next Page
Loading...
