GP4
eng
✎ For an AP connection, an access point device that supports wireless
connection is required and the wireless connection feature must be enabled
on the device. Contact your service provider regarding availability of wireless
connection on your access point.
✎ Check the SSID and security settings of the AP for AP connection. Refer to
the appropriate documentation for SSID and security settings of the AP.
✎ Invalid settings on network devices (wired/wireless line sharer, hub) can
cause the TV to run slowly or not operate properly. Install the devices
correctly according to the appropriate manual and set the network.
✎ An ad-hoc connection may not work depending on the connected device (e.g.
laptop).
✎ Connection method may differ according to the AP manufacturer.
To Next Page
Loading...
Need help?
General
