25
ENG
ENGLISH
REMOTE CONTROL
REMOTE CONTROL
Magic Remote Control Functions
Please read this manual carefully and use the TV correctly.
When the message “Magic remote control battery is low. Change the battery.” is
displayed, replace the battery.
To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching
and ends to the label inside the compartment, and close the battery cover. Be
sure to point the remote control at the remote control sensor on the TV.
To remove the batteries, perform the installation actions in reverse.
y
Do not mix old and new batteries, as this may damage the remote control.
CAUTION
Make sure to point the remote control at the remote control sensor on the TV.
HOMEBACK
VOL
CH
MY APPS
(POWER
)
Turns the TV on or off.
Pointer (RF & Bluetooth transmitter)
Blinks the light when operating.
Home
Accesses the Home menu.
Navigation buttons
(up/down/left/right)
Scrolls through menus or options.
BACK
Returns to the previous level.
+ VOL -
Adjusts the volume level.
^
CH
v
Scrolls through the saved channels.
(MUTE)
Mutes all sounds.
MY APPS
Sees MY APPS.
(User Guide)
Sees User Guide.
(Wheel)
Selects menus or options and confirms
your input.
If you press the navigation button while
moving the pointer on the screen,
the pointer disappears, and the Magic
remote control works as a regular
remote control.
To display the pointer again, shake the
Magic remote control from side to side.
1
If you press
(Wheel)
on the Magic remote
control, the following screen appears.
Views the information of the current program
and screen.
2
If you press
(Wheel)
on the Magic remote
control, the following screen appears.
Set the channel you want.
You can press the CH button on the remote
control to set the channel.
3
If you move the Magic remote control on the
bottom of the screen.
You can selcet Quick Menu.
%ULHI,QIR7LWOH7HVW
,QIR
᱈
$0
79
L
1
2
3