29
ENG
ENGLISH
ENTERTAINMENT
To set up the network settings: (Even if your TV
has already connected automatically, running
setup again will not harm anything)
1
Press
SETTINGS
to access the Home menu.
2
Press the Navigation buttons to scroll to
NETWORK
.
3
Press the Navigation buttons to select
Network Connection
and press
(Wheel)
.
4
Press the Navigation buttons to select
IP Auto
Setting
or
IP Manual Setting
and press
(Wheel)
.
1HWZRUN6HWWLQJ
,QVHUWWKH,3DGGUHVV
,30RGH
܁,30DQXDO6HWWLQJ۽
ᯘ,3$GGUHVV
ᯘ6XEQHW0DVN
ᯘ*DWHZD\
'160RGH
,30DQXDO6HWWLQJ
ᯘ'166HUYHU
(QWHU
ᰳ3UHYLRXV ᯙ1H[W
- If selecting
IP Manual Setting
, press the
Navigation and Number buttons. IP addresses
will need to be input manually.
-
IP Auto Setting
: Select this if there is a DHCP
server (Router) on the local area network
(LAN) via wired connection, the TV will
automatically be allocated an IP address. If
you’re using a broadband router or broadband
modem that has a DHCP (Dynamic Host
Configuration Protocol) server function. The
IP address will automatically be determined.
-
IP Manual Setting
: Select if there is no DHCP
server on the network or you want to set the
IP address manually.
4
When you are finished, press
Enter
.
#
NOTE
y
If the network setting screen do not
appear automatically, press
SETTINGS
䮫
NETWORK
䮫
Network Connection
.
y
If the network settings are not set correctly,
the functions or services that require the
network connection may not work properly.
y
If the options in
Network Connection
are not
set properly, check your Internet connection
and contact your Internet service provider.
y
To use Internet on TV, you must have active
broadband Internet connection at all times.
y
If you cannot access the Internet, check the
network status of your computer.
y
If the auto IP setting of the router
expires, when using
IP Auto Setting
,
you may experience temporary network
disconnection. Refer to the owner's manual
of the router for details.
To Next Page
Loading...
