When recording, if the available storage space
becomes low, the recording will be automatically
stopped.
Recordings of less than 10 seconds will not be
saved.
To save disk space while recording broadcasts, no
data will be saved if there is no signal.
The recording function will not initiate for a
copy-protected program.
The displayed time slightly differ from the actual
time.
In no signal or film source, the displayed time
slightly differ from the actual time.
The recording can not be used with content-pro-
tected programs on progressing Timeshift .
If the old tape is recoreded, this may cause dam-
age to the recording quality.
It will be stored separately the programme according
to the colour system signal.
The extra recording time added to existing setting equals
the final recording time.
After adjusting the recording time, select
OOKK
. The Status
bar will be displayed.
■
Press the
EEXXIITT
button to hide the Status bar. Press the
OOKK
button to display the Status bar.
Recording stops when the selected duration is reached or
when you press the button.
Although recording has stopped, the Timeshift feature
remains active.
Elapsed recording time
Total recording duration
4
5
3
Stop recording due to copy protection.
00:00
Recording time
00:00~02:00 (0 min recorded)
No change
0:00 / 2:00
To Next Page
Loading...
Need help?
General
