What to do if the Yes 5V Monitor signal doesn't appear on LG 42PC35 Plasma TV?
If the Yes 5V Monitor signal doesn't appear on your LG Plasma TV, you should check the VSC RL-ON signal, the VSC Vs-ON signal, and the VSC low voltage output circuit.
What to do if the VSC signal RL-ON doesn't appear on LG 42PC35?
If the VSC signal RL-ON does not appear, check the VSC Vs-ON signal on your LG Plasma TV.
General| Screen Size | 42 inches |
|---|---|
| Display Technology | Plasma |
| Resolution | 1024 x 768 |
| Aspect Ratio | 16:9 |
| Brightness | 1500 cd/m² |
| HDMI Ports | 2 |
| Component Video Input | 1 |
| Composite Video Input | 1 |
| S-Video Input | 1 |
| RF Antenna Input | 1 |
| Audio Output | 20W (10W x 2) |
| Viewing Angle | 178 degrees |
Provides general advice for servicing procedures and safety.
Procedure for measuring AC leakage current with the TV plugged in.
Procedure for measuring resistance for chassis return paths.
Details the technical specifications for the TV module.
Instructions for adjusting Va and Vs voltages on the power PCB.
Step-by-step guide for manual white balance calibration.
Steps to diagnose and resolve issues related to the power board.
Procedure for troubleshooting the 'No Power' symptom.
Procedure for troubleshooting the 'Protect Mode' symptom.
Procedure for troubleshooting the 'No Raster' symptom.
Troubleshooting guide for various screen display problems.
Procedure for troubleshooting the 'No Sound' symptom.
To Next Page
