10
Antenna/Cable
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
• Use a signal splitter to use more than 2 TVs.
• If the image quality is poor, install a signal amplifier properly to improve the image quality.
• If the image quality is poor with an antenna connected, try to realign the antenna in the correct direction.
• An antenna cable and converter are not supplied.
Satellite dish
Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω). (Depending on model)
How to use the ferrite core
Use the ferrite core to reduce the electromagnetic interference in the power cord. Wind the power cord on the ferrite core once.
(Depending on model)
[Wall side] [TV side]
10 cm (+ / -2 cm)
To Next Page
Loading...
