Tips for using USB storage devices
►y Only a USB storage device is recognizable.
►y If the USB storage device is connected through
a USB hub, the device is not recognizable.
►y A USB storage device using an automatic rec-
ognition program may not be recognized.
►y A USB storage device which uses its own driver
will not be recognized.
►y The recognition speed of a USB storage device
may depend on each device.
►y Please do not turn off the display or unplug
the USB device when the connected USB stor-
age device is working. When such a device is
suddenly separated or unplugged, the stored
files or the USB storage device may be dam-
aged.
►y Please do not connect the USB storage device
which was artificially maneuvered on the PC.
The device may cause the product to malfunc-
tion. Only use a USB storage device which has
normal music files, image files
or movie files.
►y Please only use USB storage devices formatted
using the FAT32 file system. Storage devices
formatted with utility programs that are not
supported by Windows may not be recog-
nized.
►y Please connect power to a USB storage device
(over 0.5 A) which requires an external power
supply. If not, the device may not be recog-
nized.
►y Please connect a USB storage device with the
cable included by the device maker.
►y Some USB storage devices may not be sup-
ported or operate smoothly.
►y File alignment method of USB storage devices
is similar to Window XP and the monitor can
recognize up to 100 English characters.
►y Be sure to back up important files since data
stored on a USB memory device may be dam-
aged. We will not be responsible for any data
loss.
►y If the USB HDD does not have an external
power source, the USB device may not be
detected. So be sure to connect the external
power source.
- Please use a power adaptor for an external
power source.
►y If your USB memory device has multiple parti-
tions, or if you use a USB multi-card reader,
you can use up to 4 partitions or USB memory
devices.
►y If a USB memory device is connected to a USB
multi-card reader, its volume data may not be
detected.
►y If the USB memory device does not work prop-
erly, disconnect and reconnect it.
►y How fast a USB memory device is detected
differs from device to device.
►y If the USB is connected in Standby Mode, that
drive will automatically be loaded when the
display is turned on.
►y The recommended capacity is 1 TB or less for
a USB external hard disk and 32 GB or less for
USB memory.
►y Any device with more than the recommended
capacity may not work properly.
►y If a USB external hard disk with a Energy Sav-
ing function does not work, turn the hard disk
off and on again to make it work properly.
►y USB storage devices below USB 2.0 are sup-
ported as well. But they may not work properly
with videos.
►y A maximum of 999 folders or files can be
recognized under one folder.
►y It is recommended you use a certified USB
storage device and cable. Otherwise, a USB
storage device may not be detected or a play-
back error may occur.
►y Only a USB memory device can be used to play
back the files distributed and stored by Super-
Sign Manager. A USB hard disk or multi-card
reader will not work.
►y Only an FAT 32 file formatted storage device
can play back the files distributed and stored
by SuperSign manager.
►y A USB 3.0 storage device may not work.
►y Data on some USB storage devices may be
damaged in a high temperature environment.
►y It is recommended that you avoid playing
contents using more than two USB ports
simultaneously.
To Next Page
Loading...
Need help?
General
