Send to USB
1
Select the desired files using the or buttons and press the OK button.
2
When the download is complete, the screen switches to the initial installation screen.
NOTE
Model TLL: Appears under the top-level folder on your USB drive in the form of an xx(model name)xxxxx .TLL.
The 'xxxxx' refers to a number. Model TTL files appear only when they are compatible with the given model,
and they are transferrable only when the model names match.
For example, if the model is 43SE3B-5DC, its Model TLL file is saved as a file with any name between xxSE3B-
5DC00001.TLL and xxSE3B-5DC99999.TLL.)
Global TLL: Appears under top-level folder on your USB drive in the form of a GlobalClonexxxxx.TLL. The
'xxxxx' refers to a number.
For example, if the model is 43SE3B-5DC, its Global TLL file is saved as a file with any name between Global-
Clone00001.TLL and GlobalClone99999.TLL.)
(* For a Global TLL file to be cloned, the Model TLL file located in the same folder needs to be deleted or moved
to a different folder.)
When Global TLL and Model TLL files are both present in the top-level folder, press the red button to display
the Global TLL file or the green button to display the Model TLL file.
Send To USB
GlobalClone00001.TLL
Select file type
Global TLL
Model TLL
OK
Previous
Select the file name and press OK to start
ꔠ
ꔡ
USB Cloning
Ez Download
Receive from USB
Send to USB
Logo Image Download
Send to Daisy Chain
OK
Previous
To Next Page
Loading...
Need help?
General
