1
Connect the HDMI output of the DVD to the
HDMI/DVI IN 1
,
2
,
3
or
4
jack on the Media Box.
No separate audio connection is necessary.
HDMI supports both audio and video.
1. How to connect
2. How to use
■
Select the
HDMI1
,
HDMI2
,
HDMI3
, or
HDMI4
input
source on the Media Box using the
INPUT
button on the
remote control.
■
Refer to the DVD player's manual for operating instructions.
2
1
G
Check HDMI cable over version 1.3.
If the HDMI cables don’t support HDMI version 1.3, it can
cause flickers or no screen display. In this case use the lat-
est cables that support HDMI version 1.3.
NOTE