To Next PageTo Next PageWhat to do if my LG 47LX6500 has no picture and no sound?
If your LG LCD TV shows no picture and has no sound, try the following: * Check your antenna's direction and location. * Test the wall power outlet by plugging another device into it. * Note that it's normal for the image to be muted during the startup process.
What causes lines or streaks in pictures on LG 47LX6500?
If you see lines or streaks in the picture on your LG LCD TV, check the antenna and try changing its direction. If you're using an HDMI cable, ensure it supports High Speed HDMI to avoid flickers or display issues; use the latest cables if necessary.
Why LG 47LX6500 remote control doesn't work?
If your LG LCD TV remote control isn't working, try these steps: * Make sure the batteries are installed correctly, matching + to + and - to -. * Ensure the remote is set to the correct operating mode (TV, VCR, etc.). * Try installing new batteries. * Check if the sleep timer is activated.
What to do if my LG LCD TV turns off suddenly?
If your LG LCD TV turns off suddenly, it could be due to a power interruption. Check the power control settings. Also, the TV will automatically turn off in 15 minutes if there is no signal.
What causes poor color or picture on LG LCD TV?
If you're experiencing poor color or picture quality on your LG LCD TV, try switching to another channel as the issue may be with the broadcast. Also, ensure the video cables are properly installed and activate any function to restore the brightness of the picture.
How to fix poor reception on some channels of LG LCD TV?
If you're experiencing poor reception on some channels with your LG LCD TV, reorient the antenna to better receive the weaker station's signal. Also, check for any potential sources of interference.
What to do if LG LCD TV shows horizontal/vertical bars or picture shaking?
If your LG LCD TV is showing horizontal or vertical bars, or the picture is shaking, check for local interference from electrical appliances or power tools. It could also be a problem with the station or cable product; try tuning to another station.
What to do if my LG 47LX6500 LCD TV screen color is unstable or single color?
If the screen color on your LG LCD TV is unstable or displays a single color, check the signal cable. If problems persist, try reinstalling the PC video card.
What to do if my LG LCD TV has no output from one of the speakers?
If there's no output from one of the speakers on your LG LCD TV, adjust the Balance in the menu option.
Why does my LG LCD TV make unusual sound?
An unusual sound from inside your LG LCD TV, caused by a change in ambient humidity or temperature, may occur when the product is turned on or off. This does not indicate a fault with the product.
General| Display diagonal | 47 \ |
|---|---|
| Product color | Black |
| Audio system | Dolby Digital |
| RMS rated power | 20 W |
| Number of speakers | 2 |
| PC in (D-Sub) | Yes |
| HDMI ports quantity | 4 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Digital audio optical out | 1 |
| Power consumption (standby) | 0.1 W |
| Power consumption (typical) | 150 W |
| Annual energy consumption | 183 kWh |
Weight and Dimensions| Depth (with stand) | 285 mm |
|---|---|
| Height (with stand) | 758 mm |
| Weight (with stand) | 22900 g |
| Depth (without stand) | 29.3 mm |
| Width (without stand) | 1127 mm |
| Height (without stand) | 692 mm |
| Weight (without stand) | 19700 g |
Provides general advice for safe service operations and component handling.
Covers both cold and hot leakage current testing procedures to ensure safety.
Defines the scope, conditions, and methods for product testing.
Lists core technical details of the TV module, including size and power.
Details optical performance parameters of the TV module like viewing angle and contrast.
Lists supported component video input resolutions and frequencies.
Details RGB input formats for PC connection and supported HDMI input modes.
Lists 3D input modes supported via HDMI and USB connections.
Describes general conditions and prerequisites for performing adjustments.
Details the process for automated calibration of TV functions.
Explains the Analog-to-Digital Converter calibration process.
Covers LAN checks and V-COM voltage adjustment for liquid crystal driving.
Instructions for downloading model/serial information and CI+ keys.
Covers manual ADC calibration and EDID/DDC data download procedures.
Procedure to adjust white balance for color accuracy.
Details adjustment methods, conditions, and cautionary items.
Provides reference tables for white balance compensation.
Covers wireless, Eye-Q, dimming, and 3D tests.
Covers IR inspection, option selection, and ship-out checks.
Describes preparation, execution, and checkpoints for safety tests.
Specifies conditions for audio measurements.
Instructions for downloading software via USB for service purposes.
Details the 3F board's components and connections.
