Do you have a question about the LG 47LM6700 and is the answer not in the manual?
Screen shape | Flat |
---|---|
Response time | - ms |
Display diagonal | 47 \ |
Display brightness | - cd/m² |
Native aspect ratio | 16:9 |
Native refresh rate | 60 Hz |
LED backlighting type | Edge-LED |
Supported video modes | 1080i, 1080p, 720p |
Contrast ratio (dynamic) | 8000000:1 |
Screen format adjustments | 4:3, 14:9, 16:9, Zoom |
Motion interpolation technology | TruMotion 120 Hz |
3D | Yes |
3D glasses quantity | 6 |
Supported 3D technologies | FPR 3D |
Tuner type | Analog & digital |
Analog signal format system | - |
Digital signal format system | DVB-T |
Smart modes | Game, Movie, Music, Sports, Standard, Vivid |
Audio system | Virtual Surround |
Audio decoders | Dolby Digital |
RMS rated power | 20 W |
Number of speakers | 2 |
DVI port | No |
HDMI ports quantity | 4 |
DVI-D ports quantity | 0 |
USB 2.0 ports quantity | 3 |
Component video (YPbPr/YCbCr) in | 1 |
Consumer Electronics Control (CEC) | SimpLink |
Product color | Silver |
Panel mounting interface | 400 x 400 mm |
Power consumption (standby) | 0.3 W |
Sustainability certificates | ENERGY STAR |
Depth (with stand) | 263 mm |
---|---|
Height (with stand) | 701 mm |
Weight (with stand) | 17500 g |
Depth (without stand) | 33.4 mm |
Width (without stand) | 1063 mm |
Height (without stand) | 627 mm |
Weight (without stand) | 15300 g |
General safety advice and warnings for servicing the TV chassis.
Basic servicing practices, use of isolation transformers, and component handling.
Procedures for performing cold and hot AC leakage current tests.
Defines application range, specifications, and conditions for adjustments.
Details PCB assembly, LAN port inspection, and RS-232C protocols.
Covers EDID download, white balance, EYE-Q, and remote control tests.
Steps for preparing and performing GND and ESD tests.
Instructions for firmware updates and software downloads via USB.
Covers no video, color issues, bars, and external device problems.
Addresses no power and intermittent power or auto-off issues.
Covers no audio and distorted or interrupted audio problems.
Addresses remote control and external device recognition issues.
Guides for diagnosing circuit noise and mechanical noise problems.
Steps for identifying and repairing physical exterior damage.
Procedure to check and adjust white balance for video errors.
Method to measure power board voltages for video errors.