LG 47LX9500 - Page 47

September LCD TV 47LX9500
47
Removing the T
Removing the T
-
-
CON/3D Board
CON/3D Board
1. Lay the TV down on its face. Use some scratch resistant material to avoid damaging the front frame.
2. Remove the stand support bracket that surrounds the T-CON/3D board. (6 screws) See Fig. 1.
Comes with the Panel
Fig. 1
1 2
3
45
6
Stand Bracket
1
2
3
4
P805P806
P802P803
P804
3. Disconnect P802, P803, P804, P805 and P806.
4. Remove the 4 screws securing the T-CON/3D.
Fig. 2
Push InPush In
P802
P805
P806
Flip up the Locking mechanism to release ribbon cable.