PICTURE CONTROL
117
Zoom 1
Choose Zoom 1 when you want the picture to be altered, both vertically extended and cropped. The
picture taking a halfway trade off between alteration and screen coverage.
Zoom 2
With this function, when the SD screen is sent to the HD with black at the left side and the right side,
this screen can be extended to be fully displayed with no black area.
It is enabled only at the DTV HD broadcasting. (It is the reference for displaying ‘HD’ at the channel
banner if the height is greater than 480.)
Cinema Zoom
Choose Cinema Zoom when you want to enlarge the picture in correct proportion. Note: When enlarg-
ing or reducing the picture, the image may become distorted.
■
FF
or
GG
button: Adjust proportion of Cinema Zoom. The adjustment range is 1-16.
■
DD
or
EE
button: Move the image on the screen.
Cinema Zoom
EE
EE
Enter
1
GG
Move
MFL59166615-Edit3-en 12/2/09 3:44 PM Page 117
To Next Page
Loading...
