TIME MACHINE
87
USB HDD (over 40 GB)
To use the USB device (over 40 GB) for Timemachine, execute
UUSSBB DDeevviiccee IInniittiiaalliizzaattiioonn
.
A
It initializes the HDD connected to the USB as disk mode for Timemachine.
A
It is activated only when the USB HDD available for Timemachine is connected.
A
When
UUSSBB DDeevviiccee IInniittiiaalliizzaattiioonn
is executed, all the data stored in the USB device is deleted.
A
While performing
UUSSBB DDeevviiccee IInniittiiaalliizzaattiioonn
, do not remove the USB device. It may cause error on the TV
and the storage device.
Connect the USB device to the
UUSSBB IINN
jacks on
the back(or side) of TV.
1
2
3
•
When initialization is completed, a popup notice of com-
pletion is displayed and the connected USB HDD is avail-
able for Timemachine.
2
GG
Depending on the capacity of the USB device,
the initialization time may vary.
GG
The initialized USB device is not recognized by
the PC.
GG
When a USB device of less than 40 GB is con-
nected, the USB Device Initialization is not
activated.
GG
Supported maximum external HDD size for
back-up is up to 1TB.
Enter
Move
TIME MACHINE
Time Machine Mode : On
Recorded TV
Schedule
Record
Schedule List Initialization
USB Device Initialization
Enter
Move
TIME MACHINE
Time Machine Mode : On
Recorded TV
Schedule
Record
Schedule List Initialization
USB Device Initialization
Ye s No
Initializing will delete all existing data.
Press Yes to start USB Device initialization.
!
USB device Initialization
TIME MACHINE(PAUSE & REPLAY OF LIVE TV)
This function allows the unit to automatically record live TV and make it available for viewing at any time.
With the Time Machine turned on, you may pause and rewind normal TV viewing at any time without missing any of
the live broadcast.
(Time Machine and Recording functions may not work if the signal strength is weak.)
TThhiiss ffuunnccttiioonn iiss oonnllyy ooppeerraatteedd aafftteerr iinniittiiaalliizzaattiinngg UUSSBB DDeevviiccee..
To Next Page
Loading...
