LG 47SL90QD - Page 125

PICTURE CONTROL
125
■
This is the function to adjust the overall color of the screen to the feeling you want.
a. Method : 2 Points
- Pattern: Inner, Outer
- Red/Green/Blue Contrast, Red/Green/Blue Brightness:
The adjustment range is -50 - +50.
b. Method : LCD TV models: 10 Point IRE, PLASMA TV models: 20 Point IRE
- Pattern: Inner, Outer
- IRE (Institute of Radio Engineers) is the unit to display the size of the video signal
and can be set among 10, 20, 30 - 100(LCD TV models) or 5, 10, 15 - 95,
100(PLASMA TV models). You can adjust Red, Green or Blue according to each set-
ting.
- Luminance(For LCD TV models): This function displays calculated luminance value for
2.2 gamma. You can input luminance value you want at 100 IRE, than the target lumi-
nance value for 2.2 gamma is displayed at every 10 steps from 10 IRE to 90 IRE.
- Red/Green/Blue: The adjustment range is -50 - +50.
■
As the tool used by the experts to make adjustments by using the test patterns, this
does not affect other colors but can be used to selectively adjust the 6 color areas
(Red/Green/Blue/Cyan/Mgt/Yellow).
Color difference may not be distinctive even when you make the adjustments for the
general video.
Adjusts Red/Green/Blue/Yellow/Cyan, Magenta.
- Red/Green/Blue/Yellow/Cyan, Magenta Color: The adjustment range is -3
0 - +30.
- Red/Green/Blue/Yellow/Cyan, Magenta Tint: The adjustment range is -30 - +30.
- This feature is disable in RGB-PC and HDMI-PC mode.
*This feature is not available for all models.
■
As the technology to reduce the power consumption while keeping the same bright-
ness, this has the effect of reducing power consumption, improvement in contrast.
White Balance
(Expert control)
Color Temperature
(Expert control)
: Only 42/47/55SL80**,
42/47SL90**
Color Management System
OPC
(For LCD TV models)
■
This is the pattern necessary for expert adjustment.
■
This function is enabled in "
PPiiccttuurree MMooddee
-
EExxppeerrtt
" when you watch DTV.
Expert Pattern
■
This is the function to filter the specific colors of the video.
You can use the RGB filter to set color saturation and hue accurately.
Color Filter
*This feature is not available for all models.
■
This is the function to express richer color.
■
This feature represents rich color as much as conventional video signal.
■
This function is enabled in "
PPiiccttuurree mmooddee
-
CCiinneemmaa
,
EExxppeerrtt
" when xvYCC
signal is inputted through HDMI(1080p).
xvYCC
■
Convert the color of a different video to HD color.
Color Standard
■
Show clearer and distinctive yet natural corners of the video.
Edge Enhancer
MFL59166615-Edit3-en 12/2/09 3:44 PM Page 125