PREPARATION
24
PREPARATION
For 32/42/47/55SL80**
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
1
INSTALLATION (
Except 55SL80**)
GG
When assembling the desk type stand, make sure
the screws are fully tightened (If not tightened
fully, the TV can tilt forward after the product
installation). Do not over tighten.
NOTE
DETACHMENT
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
1
Remove the screws from the TV.
2
Detach the stand from TV.
3
PROTECTION COVER
After removing the stand, install the included
pprrootteeccttiioonn ccoovveerr
over the hole for the stand.
Press the
PPRROOTTEECCTTIIOONN CCOOVVEERR
into the TV
until you hear it click.
4
Fix the 4 screws securely using the holes in the
back of the TV.
4
Assemble the parts of the
SSttaanndd BBooddyy
with
the
SSttaanndd BBaassee
of the TV.
Assemble the TV as shown.
2
3
SSTTAANNDD BBOODDYY
SSTTAANNDD BBAASSEE
MFL59166615-Edit1-en 12/2/09 3:38 PM Page 24
To Next Page
Loading...
