EXTERNAL EQUIPMENT SETUP
46
EXTERNAL EQUIPMENT SETUP
Auto Configure
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still
not correct, try using the manual settings or a different resolution or refresh rate on the PC.
Auto config.
Resolution
Position
Size
Phase
Reset
SCREEN
Move
To Set
■
If the position of the image is still not
correct, try Auto adjustment again.
■
If picture needs to be adjusted again
after Auto adjustment in RGB-PC, you
can adjust the
PPoossiittiioonn
,
SSiizzee
or
PPhhaassee
.
■
Because the image with the black back-
ground may fail the auto adjustment,
use the image with the bright back-
ground.
Yes No
Previous
Enter
Move
PICTURE
E
RG
Picture Mode : Standard
• Backlight 70
• Contrast 90
• Brightness 50
• Sharpness 60
• Color 60
• Tint 0
• Advanced Control
• Reset
Screen (RGB-PC)
Select
PPIICCTTUURREE
.
Select
SSccrreeeenn((RRGGBB--PPCC))
.
Select
AAuuttoo ccoonnffiigg..
.
Select
YYeess
.
2
To Next Page
Loading...
