What to do if the 'Check signal cable' message appears on my LG 47WS50MW?
If the 'Check signal cable' message appears on your LG Monitor, it could be due to a disconnected signal cable between your PC and the monitor. Check the signal cable to ensure it is properly connected. You can also press the 'INPUT' menu on the remote control to verify the input signal.
Why did my LG 47WS50MW Monitor power suddenly turn off?
Your LG Monitor might have suddenly turned off because the sleep timer is set, there may have been a power interruption, or the power control settings need checking.
How to fix 'Out of range' message on LG 47WS50MW Monitor?
If you see an 'Out of range' message on your LG Monitor, it means the signal from your PC (video card) is outside the monitor's vertical or horizontal frequency range. Adjust the frequency range by referring to the Specifications in this manual. The maximum resolution for RGB, HDMI, DVI-D, and Display Port is 1920 x 1080 @ 60 Hz.
How to check if the power cord is connected to my LG 47WS50MW?
To check if the power cord is connected to your LG Monitor, verify that the power cord is properly connected to the outlet.
Why is the screen color unstable or mono-colored on my LG Monitor?
Unstable or mono-colored screen on your LG Monitor may be due to the signal cable connection. Check the connection status of the signal cable. Also, try re-inserting the PC video card.
How do I fix horizontal noise or blurred characters on my LG Monitor?
If you're experiencing horizontal noise or blurred characters on your LG Monitor, and you're using a D-Sub analog signal, press the "AUTO" button on the remote to automatically select the optimal screen status. If it's still not right, go to [PICTURE] - [Screen] - [Phase] in the OSD menu.
What to do if the screen is displayed abnormally on my LG Monitor?
If your LG Monitor screen is displaying abnormally, it might be due to an incorrect input signal connected to the signal port. Ensure you connect the signal cable that matches the source input signal.
How to remove thin lines on the background screen of my LG 47WS50MW?
If thin lines appear on the background screen of your LG monitor when using a D-Sub analog signal, press the "AUTO" button on the remote control to automatically select an optimal screen status. If adjustment is not satisfactory, select [PICTURE] - [Screen] - [Size] in OSD menu.
How to fix dull sound on my LG Monitor?
To address dull sound on your LG Monitor, adjust the Clear Voice ll, Treble, and Bass settings appropriately.
How to increase the sound volume on my LG Monitor?
If the sound is too low on your LG Monitor, adjust the volume.
To Next Page
General
