LG 49LJ5100M - Disassembly Guide

- 11 -
Copyright © LG Electronics Inc. All rights reserved.
Only for training and service purposes.
1. Disassembly of Back cover
(1) Remove screw in the set
(2) Check both right/left hole
(3) Attach tape to ‘Long nose pliers’
(4) Put ‘long nose’ into the hole
(5) Open B/C with push/pulling long nose to upper and lower
sides.
(6) Disassemble Back cover
* Disassemble it from left to right for top side hook on Back
cover
DISASSEMBLY
w
t
W < 4.0mm
t< 3.0mm
▶ Tool spec
- Long nose pliers
- Needle nose pliers
: M3*5.5 1EA
: M4*10 4EA(Taptite)
: M3*10 5EA(Taptite)
*SCREW TORQUE :
SCREW : 4 ~ 6Kgf.cm
SCREW : 5 ~ 7Kgf.cm
SCREW : 5 ~ 7Kgf.cm