To Next PageTo Next Page
Need help?Do you have a question about the LG 49UJ634V and is the answer not in the manual?
General| Screen shape | Flat |
|---|---|
| Response time | - ms |
| Display diagonal | 49 \ |
| Display brightness | - cd/m² |
| Display technology | LED |
| Native aspect ratio | 16:9 |
| LED backlighting type | Direct-LED BLU |
| Display diagonal (metric) | 123 cm |
| Supported graphics resolutions | 3840 x 2160 |
| Motion interpolation technology | - |
| Product color | Black |
| Panel mounting interface | 300 x 300 mm |
| 3D | No |
| Annual energy consumption | 103 kWh |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.3 W |
| Power consumption (typical) | 74 W |
| Package depth | 170 mm |
| Package width | 1193 mm |
| Package height | 805 mm |
| Package weight | 15000 g |
| Cables included | AC |
| Remote control type | AN-MR650A |
| Audio formats supported | AAC, AAC HE, AC3, EAC3, MP2, MP3, PCM, WMA, apt-X |
| Video compression formats | HEVC, VP9 |
| Tuner type | Analog & digital |
| Digital signal format system | DVB-C, DVB-S2, DVB-T2 |
| Operating system version | 3.5 |
| Operating system installed | Web OS |
| Audio decoders | DTS, DTS-HD |
| RMS rated power | 20 W |
| Number of speakers | 2 |
| HDMI ports quantity | 3 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN (RJ-45) ports | 1 |
| Consumer Electronics Control (CEC) | SimpLink |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 0 |
| Programming period | 8 day(s) |
Weight and Dimensions| Depth (with stand) | 259 mm |
|---|---|
| Height (with stand) | 705 mm |
| Weight (with stand) | 12700 g |
| Depth (without stand) | 81 mm |
| Width (without stand) | 1110 mm |
| Height (without stand) | 650 mm |
| Weight (without stand) | 11300 g |
General safety advice, isolation transformer usage, fuse handling, and leakage current checks.
Guidelines for safe servicing, handling ES devices, and soldering best practices.
Specifies chassis, test conditions, performance standards, and market scope.
Details on external input formats for 2D, 3D modes, HDMI, and PC.
Methods for updating TV software using USB or Network (NSU).
Block diagrams for K3Lp chipset, interfaces, memory, power, and GPIO.
Step-by-step guide for disassembling the TV, including back cover and stand.
Flowcharts for diagnosing video issues: no video, picture issues, color errors.
Troubleshooting flowcharts for power, audio, function, noise, and exterior defects.
Detailed procedures for video errors: backlight, white balance, tuner, cables.
Detailed procedures for power, audio, and function errors: indicators, voltages, menus, remotes.
Visual examples of symptoms caused by cable, main board, module, or T-Con issues.
Guide to using Smart JIG for power board diagnosis across various TV models.
