LG 49UV560H - User Manual

Questions and Answers

J
Jennifer GonzalezAug 12, 2025
Why doesn't my LG TV remote work?
- Y
  yramseyAug 12, 2025
  There are several reasons why the remote for your LG TV might not be working: * Ensure the remote is in 'TV' mode by pressing the MODE key. * Make sure you're pointing the remote directly at the IR receiver on the TV. * The remote might be too far from the TV, or something might be blocking the signal. Try moving closer, dimming the lights, and removing any obstacles. * If applicable, ensure the MPI cable is connected to the MPI device. * The batteries might be weak or inserted incorrectly. Try replacing them, ensuring the '+' and '-' are correctly aligned. * The room might be too bright. Try dimming the lights. * You might be using the wrong installer remote. A compatible LG installer remote is required. Contact your LG representative.
L
Lori LewisAug 18, 2025
What to do if my LG TV has no picture?
- M
  Michelle JohnsAug 18, 2025
  If your LG TV has no picture, consider the following: * Ensure the TV is turned ON. Check for any power failures. * Verify that the antenna or cable is properly connected to the TV. * Check all connections to the TV to ensure they are correct. * If applicable, connect the MPI cable to the MPI device. * The program may be encrypted; try switching to another channel. * The tuning band may be incorrect; adjust the Installer Menu settings.
D
Derek BurkeAug 25, 2025
Why does my LG TV have normal picture but no sound?
- B
  Brian StephensAug 25, 2025
  If your LG TV has a picture but no sound, or the sound quality is poor: * Check if the audio is muted. Press the MUTE button or use the Volume Up key to increase the sound level. * The issue might be with the broadcast itself. Try tuning to a different channel.
R
robertsjenniferAug 29, 2025
How to fix LG TV if I can't enter channel number?
- A
  aliciaadamsAug 30, 2025
  If you're unable to directly enter a channel number on your LG TV, here's what might be happening: * If the TV is in Pass-through Mode, the Installer Menu item 028 CH. OVERIDE might be set to 0 (disabled). To enable direct keypad entry, set CH. OVERIDE to 1. * If the TV is not in Pass-through Mode, the channel you're trying to enter might not be included in the current Channel Map. Use the appropriate application or content editor to modify the Channel Map if necessary.
V
Vanessa FlowersSep 5, 2025
What to do if I get a communication error on my LG TV?
- J
  jasongeorgeSep 5, 2025
  If you're encountering a Communication Error (“Communications Timeout”) on your LG TV: * Ensure all communication cables are properly connected. * Verify that the TV is receiving power by checking the power cord. * Make sure the TV is turned ON. The default setting of Installer Menu item 118 POWER SAVINGS must be enabled. * In the FTG Device Configuration Application, confirm that you've selected the correct COM port for the cable being used.

LG 49UV560H Specifications

General

Display Type	LED
HDR	Yes
Refresh Rate	60 Hz
Smart TV	Yes
HDMI Ports	3
USB Ports	2
Audio Output	20W
Connectivity	Wi-Fi, Ethernet
Operating System	webOS
Screen Size	49 inches
Resolution	3840 x 2160