29
ENGLISH
Installing on a Wall
For proper ventilation, make sure the product is installed at least 100mm (3.9inches) away from the walls on every
side. Consult a professional installation company near you for details on installation.
• To use the VESA wall mount, a separate bracket is also required. Use the M8 or higher screws to secure the separate
bracket.
• Disassemble and use the screws (M8) that is fixed to the product before installation.
CAUTION
• Disconnect the power cord before moving or installing the monitor to avoid risk of electric shock.
• If you install the monitor on a ceiling or slanted wall, it may fall and result in injury. The product should be installed by
a professional installation company specified by the retail store.
• Do not over tighten the screws as this may damage the monitor and void your warranty.
• Any damage or injuries caused by misuse or use of improper accessories are not covered by the warranty.
NOTE
• Be sure to use the correct length.
To Next Page
Loading...
