Need help?Do you have a question about the LG 50PG20 and is the answer not in the manual?
General| Audio system | SRS TruSurround HD, Dolby Digital |
|---|---|
| RMS rated power | 20 W |
| Number of speakers | 2 |
| Comb filter | 3D |
| Display diagonal | 50 \ |
| Display brightness | 1500 cd/m² |
| Display resolution | 1365 x 768 pixels |
| Display technology | LCD |
| Native aspect ratio | 16:9 |
| Supported video modes | 1080i, 1080p, 720p |
| Contrast ratio (dynamic) | 1000000:1 |
| Manual | Yes |
| Package weight | 50220 g |
| HDMI version | 1.3 |
| HDMI ports quantity | 3 |
| SCART ports quantity | 0 |
| Card reader integrated | No |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Digital audio optical out | 1 |
| Sustainability certificates | ENERGY STAR |
| Product color | Black |
| LED indicators | Y, Stand-by |
| Panel mounting interface | 400 x 400 mm |
| Cables included | AC |
| Power consumption (standby) | 1 W |
| Tuner type | Analog & digital |
| Analog signal format system | NTSC |
| Digital signal format system | ATSC |
Weight and Dimensions| Depth (with stand) | 363.22 mm |
|---|---|
| Width (with stand) | 1224.28 mm |
| Height (with stand) | 848.36 mm |
| Weight (with stand) | 41175 g |
| Depth (without stand) | 86.36 mm |
| Height (without stand) | 789.94 mm |
| Weight (without stand) | 37800 g |
Details contact info, safety, specs, overview, troubleshooting, and disassembly.
Focuses on circuit board operation, troubleshooting, and alignment for major boards.
Crucial safety warnings for technicians regarding electrical equipment and potential hazards.
Details procedures to prevent damage to sensitive electronics from static discharge.
Covers pre-run time, voltage adjustment, shock, CMOS, and physical handling of the PDP module.
Key checks for appearance, model accuracy, and defect history before service.
A systematic approach to diagnosing and resolving electronic failures using senses and tests.
Lists resolution, XD Engine, HDMI, AV modes, Clear Voice, SimpLink, speakers, and brightness life.
Describes how FluidMotion provides smoother, clearer motion by increasing picture resolution.
Guides on disassembly procedures, PWB layout, and identification of each circuit board.
Instructions for removing the back cover, noting screw count and type importance.
Provides step-by-step instructions for removing various circuit boards from the TV.
Covers common issues and diagnostic steps for the SMPS.
Outlines methods to test the SMPS functionality without full system load.
Lists pin IDs and voltage readings for key SMPS connectors.
Covers Y SUS board operation, adjustments, DC voltage, and waveform checks.
Guides on using an oscilloscope to view and analyze Y and Z SUS output waveforms.
Explains how to observe and adjust Y-Drive signals like Vsetup and Vsetdn.
Details waveform distortions from incorrect V Set Up/Dn affecting picture quality.
Covers Z-SUS board troubleshooting, test points, and bias adjustments.
Details the steps for adjusting the Z-Bias using a DVM and test points.
Covers control board signals, voltages, and quick check procedures.
Guides on analyzing LVDS signals from the main board to the control board using an oscilloscope.
Introduces the X Drive PWBs (Left, Center, Right) and their function.
Covers TCP testing procedures and visual inspection for damage.
Introduces troubleshooting the Main Board, including voltage and resistance checks.
Identifies key components and connectors on the Main PWB.
To Next Page
