11
ENGLISH
Pillow Speaker
Connect the pillow speaker (see example below)
to the PILLOW SPEAKER interface on the rear jack
panel of the TV.
Network setup
(Depending upon model)
Wired network connection
This TV can be connected to a Pro:Centric server
via the port. After making the physical
connection, the TV needs to be set up for network
communication.
Connect the port of the Modem or Router from
Pro:Centric server to the port on the TV.
Broadband Modem
Pro:Centric Server
Broadband Modem
Pro:Centric Server
Router
Broadband Modem
1 Connect the port of the Modem or Router to
the port on the TV.
2 Connect the port of the PC to the
port on the TV. (Depending upon model)
• Do not connect a modular phone cable to the
port.
• Since there are various connection methods, please
follow the specifications of your telecommunication
carrier or internet service provider.
To Next Page
Loading...
Need help?
General
