ENGLISH
15
ASSEMBLING AND PREPARING
Mounting on a table
1
Lift and tilt the TV into its upright position on
a table.
- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
2
Connect the power cord to a wall outlet.
y
Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
CAUTION
Adjusting the angle of the TV to suit view
Swivel 10 degrees to the left or right and adjust
the angle of the TV to suit your view.
(For 47LA8600, 47LA860T)
10˚10˚
Swivel 8 degrees to the left or right and adjust
the angle of the TV to suit your view.
(For 60LA8600, 60LA860T)
8˚8˚
y
Install the product on a flat surface for
easy swivel. Make sure to use the TV
cabinet or stand that can properly support
the TV.
y
After installing the TV, the angle of the
screen can be adjusted to the left or right.
y
When adjusting the angle, make sure
there are no objects near the TV and the
TV has enough distance from the wall. A
space of at least 5 cm on the front and
10 cm on the back should be available.
Otherwise, the product could fall due
to balance problems, which may cause
personal injury or damage to the product.
CAUTION
To Next Page
Loading...
