ENGLISH
14
ASSEMBLING AND PREPARING
Setting up the TV
You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment
center or other furniture.
Attaching the Stand
If you are not mounting the TV to a wall, use the following instructions to attach the stand.
y
When attaching the stand to the TV set, place the screen facing down on a cushioned table or
flat surface to protect the screen from scratches.
y
Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the
TV may tilt forward after being installed.)
y
Do not tighten the screws with too much force; otherwise they may be damaged and come
loose later.
CAUTION
y
Remove the stand before installing the TV on a wall mount by performing the stand attachment
in reverse.
NOTE
4
1
2
M4 x 14
2 EA
M4 x 14
2 EA
Stand Base
Wrapping bag
(Depending on model)
3
Front
y
The stand screws are already attached
at the back of the TV. Please use these
attached screws to assemble the TV and
stand. (For 65LA9700)
NOTE
To Next Page
Loading...
