E. Noise
Circuit noise, mechanical noise
Established
date
Revised date
12/13
LCD TV
Error
symptom
Standard Repair Process
2013. 11 .30
Check location
of noise
Identify
nose type
Circuit
noise
Replace PSU(with LED driver)
Replace LED driver
OR
Mechanical
noise
Check location of
noise
When the nose is severe replace the module
,
(For models with fix information, upgrade the S/W or
provide the description)
OR
※ If there is a “Tak Tak” noise from the cabinet,
refer to the KMS fix information and then proceed
※ Mechanical noise is a natural
phenomenon, and apply the 1st level
description. When the customer does not
agree apply the process by stage
as shown in the solution manual
(For models without any fix information, provide
the description)
OR
,
.
※ Describe the basis of the description in
“Part related to nose” in the Owner’s Manual.
Copyright ⓒ 2014 LG Electronics. Inc. All right reserved.
Only for training and service purposes
To Next Page
Loading...
