LG 55LD520 - Page 24

PREPARATION
PREPARATION
24
STAND INSTRUCTIONS
(For 32/ 42/47/55LE5400, 42/47/55LE5500, 42/47/55LE7500, 47/55LE8500)
󰮌
Image shown may differ from your TV.
INSTALLATION
!
?
!
?
NOTE
► When assembling the desk type stand,
make sure the screws are fully tightened (If
not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.
2
Assemble the parts of the STAND
BODY with the STAND BASE of the
TV.
At this time, tighten the screws that
hold the STAND BODY on.
3
Assemble the TV as shown.
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
4
Assemble the part of the STAND
REAR COVER with the TV.
5
Install the 4 screws into the holes shown.
STAND BASE
STAND BODY
STAND REAR
COVER
M4 x 20
(47/55LE8500)
M4 x 16
(Other models)
M4 x 24
(55LE5400/5500/7500)
M4 x 20
(47/55LE8500)
M4 x 16
(Other models)