LG 55LD650 - Page 8

- 8 -
LGE Internal Use OnlyCopyright LG Electronics. Inc. All right reserved.
Only for training and service purposes
4.1.2. PING Test(LAN Operating Test)
4.1.2.1. Check PCBA
1) Connect LAN to PCBA& Power On.
2) Push ADJ key on Adjust remote-controller.
3) Enter “13. ACAP PING TEST” & check Network.
4.1.2.2. Check Set
1) Connect TV-Set & PC with Cross LAN cable.(PC IP :
12.12.2.3)
2) Execute “PINT Test program”, Check setting data of
program. (TV-Set IP : 12.12.2.2)
3) Push Power Only key on Adjust remote-controlle.
4) Click “RUN”, Check “OK” or “NG”
4.2. Main S/W program download
4.2.1. Using the Memory Stick
** USB DOWNLOAD : Service Mode
1) Insert the USB memory Stick to the USB port
2) Automatically detect the SW Version.
-> S/W download process is executed automatically.
3) Show the message “Copy the file from the Memory”
4) If the TV IS Turn On, Check the updated SW Version and
Tool Option.
4.3. Input tool option.
Adjust tool option refer to the BOM.
A Tool Option Input : PCBA Check Process
A Area Option Input : Set Assembly Process
*** Tool Option table
MODEL 55LE5500 47LE5500 42LE5500 32LE5500
Tool Option1 45312 33024 24832 16640
Tool Option2 32279 32279 32279 32279
Tool Option3 64556 64556 64556 64556
Tool Option4 25004 25004 25004 24876
Tool Option5 1851 1851 1851 1851
MODEL 55LE7500 47LE7500 42LE7500 32LE7500
Tool Option1 45344 33056 24864 16672
Tool Option2 32279 32279 32279 32279
Tool Option3 64556 64556 64556 64556
Tool Option4 25004 25004 25004 24876
Tool Option5 1851 1851 1851 1851
MODEL 55LE8500 47LE8500 42LE8500 32LE8500
Tool Option1 45376 33088 24896 16704
Tool Option2 32279 32279 32279 32279
Tool Option3 64572 64572 64572 64572
Tool Option4 25004 25004 25004 24876
Tool Option5 1851 1851 1851 1851
MODEL 55LX6500 47 LX6500 42LX6500
Tool Option1
Tool Option2 32279 32279 32279
Tool Option3 64572 64572 64572
Tool Option4 25004 25004 25004
Tool Option5 1979 1979 1979