EasyManuals Logo

LG 55LF6000 Safety And Reference

LG 55LF6000
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4
ENGLISH
Grounding
(Except for devices which are not grounded.)
Ensure that you connect the earth ground wire
to prevent possible electric shock (i.e., a TV
with a three-prong grounded AC plug must
be connected to a three-prong grounded AC
outlet). If grounding methods are not possible,
have a qualified electrician install a separate
circuit breaker. Do not try to ground the unit by
connecting it to telephone wires, lightning rods,
or gas pipes.
Circuit
Breaker
Power
Supply
As long as this unit is connected to the AC wall
outlet, it is not disconnected from the AC power
source even if the unit is turned off.
Do not attempt to modify this product in any
way without written authorization from LG
Electronics. Unauthorized modification could
void the user’s authority to operate this product.
Outdoor Antenna Grounding
(Can differ by country):
If an outdoor antenna is installed, follow the
precautions below. An outdoor antenna system
should not be located in the vicinity of overhead
power lines or other electric light or power
circuits, or where it can come in contact with
such power lines or circuits as death or serious
injury can occur. Be sure the antenna system is
grounded to provide some protection against
voltage surges and built-up static charges.
Section 810 of the National Electrical Code (NEC)
in the U.S.A. provides information with respect
to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding
conductors, location of antenna discharge
unit, connection to grounding electrodes and
requirements for the grounding electrode.
Antenna grounding according to the National
Electrical Code, ANSI/NFPA 70
Ground Clamp
Grounding Conductor
(NEC Section 810-21)
Antenna Lead in Wire
Electric Service
Equipment
Antenna Discharge Unit
(NEC Section 810-20)
Ground Clamp
Power Service Grounding
Electrode System
(NEC Art 250, Part H)
NEC: National Electrical Code
Cleaning
When cleaning, unplug the power cord and wipe
gently with a soft cloth to prevent scratching. Do
not spray water or other liquids directly on the
TV as electric shock may occur. Do not clean with
chemicals such as alcohol, thinners, or benzene.
Moving
Make sure the product is turned off, unplugged,
and all cables have been removed. It may take 2
or more people to carry larger TVs. Do not press
or put stress on the front panel of the TV.
Ventilation
Install your TV where there is proper ventilation.
Do not install in a confined space such as a
bookcase. Do not cover the product with cloth or
other materials while plugged. Do not install in
excessively dusty places.
If you smell smoke or other odors coming from
the TV, unplug the power cord and contact an
authorized service center.
If water or another substance enters the
product (like an AC adapter, power cord, or TV),
disconnect the power cord and contact the
service center immediately. Otherwise, this may
result in fire or electric shock.
Use only an authorized AC adapter and power
cord approved by LG Electronics.
Otherwise, this may result in fire, electric shock,
malfunction, or product deformation.
Never disassemble the AC adapter or power
cord. This may result in fire or electric shock.

Other manuals for LG 55LF6000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG 55LF6000 and is the answer not in the manual?

LG 55LF6000 Specifications

General IconGeneral
Screen shapeFlat
Response time- ms
Display diagonal55 \
Display brightness- cd/m²
Native refresh rate60 Hz
LED backlighting type-
Supported video modes1080i, 1080p
Display diagonal (metric)139.7 cm
Screen format adjustments16:9
Supported graphics resolutions1920 x 1080 (HD 1080)
Motion interpolation technologyTruMotion 120 Hz
Annual energy consumption97 kWh
Audio decodersDolby Digital
RMS rated power20 W
Number of speakers2
DVI portNo
DVI-D ports quantity0
USB 2.0 ports quantity1
Cables includedAC
Audio formats supportedAAC, AC3, EAC3, HE-AAC, MP2, MP3, PCM
Image formats supportedJPEG XR
Video formats supportedDIVX
Product colorBlack
Panel mounting interface400 x 400 mm
Power consumption (standby)0.3 W
Package depth175.3 mm
Package width1331 mm
Package height810.3 mm
Package weight22770 g
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)254 mm
Height (with stand)772.2 mm
Weight (with stand)18370 g
Depth (without stand)55.88 mm
Width (without stand)1242 mm
Height (without stand)718.8 mm
Weight (without stand)17960 g

Related product manuals