ENG
ENGLISH
ASSEMBLING AND PREPARING
18
Mounting on a table
1 Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (minimum) space from the wall
for proper ventilation.
2 Connect the power cord to a wall outlet.
10 cm
10 cm
10 cm
10 cm
CAUTION
• Do not place the TV near or on sources of
heat, as this may result in re or other damage.
Swivel 10 degrees to the left or right and adjust
the angle of the TV to suit your view.
Adjusting the angle of the TV to suit view
10˚
10˚
CAUTION
• When adjusting the angle of the product, watch
out for your ngers.
Personal injury may occur if hands or ngers
are pinched. If the product is tilted too much, it
may fall, causing damage or injury.
Front Rear
(This feature is not available for all models.)
Securing the TV to a wall
1 Insert and tighten the eye-bolts.
- If there are bolts inserted at the eye-bolts
position, remove the bolts rst.
2 Mount the wall brackets with the bolts to the
wall.
- Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
- Make sure to keep the rope horizontal with
the at surface.
CAUTION
• Make sure that children do not climb on or
hang on the TV.
NOTE
• Use a platform or cabinet that is strong and
large enough to support the TV securely.
• Brackets, bolts and ropes are not provided.
You can obtain additional accessories from
your local dealer.
eye-bolt wall bracketbolt