19
ENG
ENGLISH
ASSEMBLING AND PREPARING
3
41
Front
Top View
4 EA
M4 x 20
y When attaching the stand to the TV set,
place the screen facing down on a cushioned
table or flat surface to protect the screen
from scratches.
CAUTION
y Make sure that the screws are inserted
correctly and fastened securely. If they are
not fastened securely enough, the TV may
tilt forward after being installed.
y Do not use too much force and over tighten
the screws; otherwise screw may be
damaged and not tighten correctly.
CAUTION
4 EA
M4 x 20
y Remove the stand before installing the TV on
a wall mount by performing the stand
attachment in reverse.
NOTE
47/55LM96
**
Stand base
Stand body
2
Stand rear cover
Setting up the TV
Image shown may differ from your TV.
Attaching the stand
To Next Page
Loading...
