14
ENGLISH
Supported Video Formats
Extension Codec
.asf, .wmv
Video
MPEG-2, MPEG-4 Part2, XViD,
H.264/AVC VC1(WMV3, WVC1),
MP43
Audio
WMA Standard WMA9(Pro),
MP3, AAC, AC3, 3D WMV
Single Stream
.divx, .avi
Video
MPEG-2, MPEG-4 Part2,
DivX3.11, DivX4, DivX5, DivX6,
XViD, H.264/AVC
Audio
HE-AAC, LPCM, ADPCM,
MPEG-1 Layer I, MPEG-1 Layer
II, Dolby Digital, MPEG-1 Layer
III (MP3)
.ts, .trp,
.tp, .mts,
.m2ts
Video H.264/AVC, MPEG-2, AVS, VC1
Audio
MPEG-1 Layer I, MPEG-1 Layer
II, MPEG-1 Layer III (MP3),
Dolby Digital, Dolby Digital
Plus, AAC, HE-AAC
.vob
Video MPEG-1, MPEG-2
Audio
Dolby Digital, MPEG-1 Layer I,
MPEG-1 Layer II, DVD-LPCM
.mp4,
.m4v,
.mov
Video
MPEG-2, MPEG-4 Part2,
DivX3.11, DivX4, DivX5, XViD,
H.264/AVC
Audio AAC, MPEG-1 Layer III (MP3)
.mkv
Video
MPEG-2, MPEG-4 Part2, XViD,
H.264/AVC
Audio
HE-AAC, Dolby Digital,
MPEG-1 Layer III (MP3), LPCM
.mpg,
.mpeg,
.mpe
Video MPEG-1, MPEG-2
Audio
MPEG-1 Layer I, MPEG-1 Layer
II, Dolby Digital, LPCM
.dat
Video MPEG-1, MPEG-2
Audio MP2
.flv
Video Sorenson H.263, H.264/AVC
Audio MP3, AAC, HE-AAC
.3gp,
.3gp2
Video H.264/AVC, MPEG-4 Part2
Audio AAC, AMR(NB/WB)
Regulatory
WARNING!
Never place a television set in an unstable
location. A television set may fall, causing serious
personal injury or death. Many injuries, particularly
to children, can be avoided by taking simple
precautions such as:
• Using cabinets or stands recommended by the
manufacturer of the television set.
• Only using furniture that can safely support the
television set.
• Ensuring the television set is not overhanging
the edge of the supporting furniture.
• Not placing the television set on tall furniture
(for example, cupboards or bookcases) without
anchoring both the furniture and the television
set to a suitable support.
• Not placing the television set on cloth or other
materials that may be located between the
television set and supporting furniture.
• Educating children about the dangers of
climbing on furniture to reach the television set
or its controls.
If your existing television set is being retained
and relocated, the same considerations as above
should be applied.
Symbols
Refers to alternating current(AC).
Refers to direct current(DC).
Refers to class II equipment.
Refers to stand-by.
Refers to “ON” (power).
Refers to dangerous voltage.
To Next Page
Loading...
