17
ENGLISH
ASSEMBLING AND PREPARING
2 EA
M4 x L20
or
ὤ㨴㥄
wyv{lj{pvuGjv}ly
2 EA
Tighten the two Torx screws
(provided as parts of the TV) with a
Torx driver bit (not provided as
parts of the TV).
3
(For 32/39LY570H, 32/39LY560H)
•When you install the screws, make certain
they are in the correct locations for the
model you have.
NOTE
Mounting on a Table
1
Lift and tilt the TV into its upright position on
a table.
- Leave a 10 cm (4 inches) (minimum) space
from the wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
(4 inches)
2 Connect the power cord or AC/DC adapter
and power cord to a wall outlet.
•Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
CAUTION
To Next Page
Loading...
