Why are there horizontal or vertical bars on my LG 60PZ570T?
If you see horizontal or vertical bars, or blurring on your LG LCD TV, check for nearby sources of interference, such as electrical appliances or power tools.
Why do lines or streaks appear on my LG LCD TV screen?
If lines or streaks appear on the images of your LG LCD TV, check the antenna connection or try aiming the antenna in a better direction.
How to fix LG 60PZ570T LCD TV remote control not working?
If your LG LCD TV isn't responding to the remote, first, make sure there are no obstructions between the remote and the TV's sensor. Then, check that the batteries in the remote are working and correctly installed. Finally, ensure the remote is set to the correct input mode, such as TV or VCR.
What to do if my LG 60PZ570T says no signal?
If your LG LCD TV displays a 'No Signal' message, ensure the signal cable is correctly connected between the TV and other devices. Also, verify the selected input source by pressing the INPUT button on your remote.
Why is there no sound on my LG LCD TV?
If your LG LCD TV has no sound but the images are displaying, try these steps: First, press the + or - button to adjust the volume. Next, check if the sound is muted by pressing the MUTE button. Then, try switching to other channels to rule out a broadcast issue. Also, check the audio cables to ensure they are properly connected. Finally, verify that the TV Speaker feature is activated in the menu.
Why does my LG 60PZ570T keep turning off?
If your LG LCD TV turns off suddenly, check the power control settings to ensure the power supply isn't interrupted. Also, verify if the Auto sleep feature is activated in the Time settings. If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.
What to do if my LG LCD TV has no picture and sound?
If your LG LCD TV shows no image and produces no sound, check to ensure the TV is turned on. Also, check that the power cord is properly connected to a working wall outlet. You can test the outlet by plugging in another device.
Why does the image appear slowly when my LG 60PZ570T turns on?
If the image on your LG LCD TV appears slowly when you turn it on, this is normal as the image is muted during the startup process. However, if the image does not appear after a few minutes, unplug the TV for 30 seconds and try again. If the image still doesn't appear, contact an authorized service center.
Why is my LG 60PZ570T LCD TV showing black and white or poor color?
If the image on your LG LCD TV appears in black and white or the color quality is poor, try adjusting the color settings in the menu. Also, ensure there is sufficient distance between the TV and other electronic devices. It's also worth checking other channels, as the issue might be with the broadcast itself.
Why is the reception on some channels poor on my LG 60PZ570T LCD TV?
If you're experiencing poor reception on some channels with your LG LCD TV, try switching to other channels as there may be an issue with the broadcast. Also, the station signal might be weak, so try adjusting the antenna's direction. Lastly, check for any local interference from appliances or power tools.
General| Display Type | Plasma |
|---|---|
| USB Ports | 2 |
| Wi-Fi | Yes |
| Refresh Rate | 600 Hz |
| 3D | Yes |
| Aspect Ratio | 16:9 |
| Smart TV | Yes |
| Screen Size | 60 inches |
| Resolution | 1920 x 1080 |
| Input Ports | Component |
To Next Page
