EasyManua.ls Logo

LG 65UH7650 - External Control Device Setup

LG 65UH7650
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
(For UH6030, UH603T, UH6000, UH6050, UH6100,
UH610T, UH6110, UH6150, UH615T series)
Wireless module (LGSBW41) Specifications
Wireless LAN Bluetooth
Standard
IEEE 802.11a/b/
g/n
Bluetooth
Frequency
Range
2400 to 2483.5
MHz
5150 to 5250 MHz
5725 to 5850 MHz
2400 to 2483.5
MHz
Output
Power
(Max.)
802.11a: 11.5 dBm
802.11b: 11 dBm
802.11g: 10.5 dBm
802.11n - 2.4GHz:
11 dBm
802.11n - 5GHz:
12.5 dBm
10 dBm or Lower
As band channels can vary per country, the user
cannot change or adjust the operating frequency.
This product is configured for the regional
frequency table.
For consideration of the user, this device should
be installed and operated with a minimum
distance of 20 cm between the device and the
body.
Contains FCC ID: BEJLGSBW41
Contains IC: 2703H-LGSBW41
External Control Device Setup
To obtain the external control device setup
information, please visit
www.lg.com
.
Regulatory
WARNING!
Never place a television set in an unstable
location. A television set may fall, causing serious
personal injury or death. Many injuries, particularly
to children, can be avoided by taking simple
precautions such as:
- Using cabinets or stands recommended by the
manufacturer of the television set.
- Only using furniture that can safely support the
television set.
- Ensuring the television set is not overhanging
the edge of the supporting furniture.
- Not placing the television set on tall furniture
(for example, cupboards or bookcases) without
anchoring both the furniture and the television
set to a suitable support.
- Not placing the television set on cloth or other
materials that may be located between the
television set and supporting furniture.
- Educating children about the dangers of
climbing on furniture to reach the television set
or its controls.
If your existing television set is being retained
and relocated, the same considerations as above
should be applied.
Symbols
Refers to alternating current(AC).
Refers to direct current(DC).
Refers to class II equipment.
Refers to stand-by.
Refers to “ON” (power).
Refers to dangerous voltage.

Other manuals for LG 65UH7650

Related product manuals