- 29 -
Copyright © LG Electronics Inc. All rights reserved.
Only training and service purposes.
DISASSEMBLY GUIDE / ASSEMBLY GUIDE (MODULE)
1. Case Top & Guide Panel Disassemble Guide
■ Step 1. LCM reverse and Main, PSU, SPK, Wif & IR disassemble
■ Step 2. Remove the Light Leakage Tapes
S-PCB Cover Shield L,R disassemble and Guide Panel Screw disassemble
* Rear Sliver screw : S-PCB Cover Shield 7 EA / Guide Panel Screw 22 EA
* Light Leakage Tapes : side 4 EA, up 5 EA
* Tapes should be reused.
■ Step 3. Case Top Screw disassemble
* down 9 EA
■ Step 4. Disassemble Source PCB from Holder.
■ Step 5. Panel and Guide Panel disassemble
* Move the FFC to the panel (use the tape)
To Next Page
Loading...
