- 31 -
Copyright © LG Electronics Inc. All rights reserved.
Only training and service purposes.
2. LED Array Disassemble & Assemble Guide
■ LED Array disassemble
(1) Disassemle the Connector form LED Array.
(2) Seprate LED Fixer From Cover Bottom.
(3) Separate the LED Array from Cover Bottom.
(4) Remove the double tape form Cover Bottom.
■ LED Array assemble
Step 1. Attach the Double Tape.
(1) Attach the Double Tape in Guide Line of Cover Bottom. (5 EA)
(2) Remove the protect film of Double Tape.
Step 2. Attach LED Array.
(1) Attach the LED Array to the round hole on Cover Bottom embo.
(2) Press the LED Array on the surface of Cover Bottom.
(3) Seprate LED Fixer From Cover Bottom.
(4) Connect the CNT to the LED Array.
*C/Bottom Guide Line
NG
OK
* Finish the Attached LED Array (5ea)
To Next Page
Loading...
