LG 86XE3FS-B User Manual (English)

Other manuals for LG 86XE3FS-B

Questions and Answers:

M
Megan RivasAug 17, 2025
What to do if my LG 86XE3FS-B displays no image?
- A
  Alexandria VillegasAug 17, 2025
  If your LG Digital Signage displays no image, first ensure the power cord is securely plugged into the outlet. Then, verify that the circuit breaker is properly connected and switched on (red). If the issue persists, check the signal cable connecting your PC to the signage. Also, access the input menu to confirm the correct input signal is selected. If the signage is operating in below-zero temperatures, it might take up to an hour for the enclosure to warm up internally.
J
Jose RamosAug 19, 2025
Why does the screen image look abnormal on my LG 86XE3FS-B Digital Signage?
- X
  xhaasAug 19, 2025
  If the screen image on your LG Digital Signage looks abnormal, ensure that the graphics card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution in the (Control Panel ? Display ? Setting) menu. Also, make sure the correct input signal is connected to the appropriate signal port. Regularly clean the heat exchanger within the enclosure, and ensure the heat exchanger is installed where air flow is not blocked. Condensation may appear on the screen, it will disappear in a certain period of time after the product is powered on. Change the screen brightness and check the [Easy Brightness Control] settings.
D
David JonesAug 22, 2025
How to fix audio on LG Digital Signage?
- S
  samanthasimpsonAug 22, 2025
  If the audio function on your LG Digital Signage isn't working, check if the audio cable is properly connected. Adjust the volume settings and ensure the sound is configured correctly. Try selecting an appropriate equalizer sound and check the volume level again.
M
Michael SchwartzAug 25, 2025
What to do if my LG 86XE3FS-B Digital Signage is not working normally?
- M
  Mary SmithAug 25, 2025
  If the operation of your LG Digital Signage does not work normally, check if the timer is set. Review the power control settings and make sure power is not interrupted. Also, verify that the circuit breaker is properly connected and switched on (red). Regularly clean the heat exchanger within the enclosure and install it where airflow is not blocked.
R
Rebecca AlvaradoAug 27, 2025
Why is the screen color abnormal on my LG Digital Signage?
- B
  Bryan BarnesAug 28, 2025
  If the screen color on your LG Digital Signage is abnormal, set the number of colors to more than 24 bits (true color) by selecting (Control Panel ? Display ? Settings ? Color Table) in Windows. Check the connection status of the signal cable and try re-inserting the PC graphics card. Note that several pixels may appear on the screen due to the unique characteristics of the LCD panel, which is not a malfunction.
M
monicaphillipsAug 30, 2025
How to prevent after-image on LG Digital Signage?
- B
  Brian CowanAug 30, 2025
  If an after-image appears on your LG Digital Signage, it may be due to using a fixed image for an extended period. To prevent this, use the screen-saver function. Image sticking can also occur when a dark image is displayed after a high-contrast image, which is normal for LCD screens.
M
michaelwilsonSep 2, 2025
What to do if the 'Unknown Product' message appears on my LG Digital Signage?
- D
  davidpriceSep 2, 2025
  To address the 'Unknown Product' message appearing when your LG Digital Signage is connected, check if the function is supported by the graphics card user manual.
B
benjaminmorrisSep 5, 2025
How to fix no image on LG Digital Signage?
- K
  Kathleen CabreraSep 5, 2025
  If your LG Digital Signage display shows no image, first ensure the power cord is securely plugged into the outlet. Then, verify that the circuit breaker is properly connected and switched on (red). If the issue persists, and the environment is cold, the display enclosure might take up to an hour to warm up. Also, check the signal cable connection between your PC and the display, and confirm the input signal via the input menu. Finally, if the signal from the PC is out of the product's frequency range, adjust it according to the specifications in the manual.
R
Ryan TaylorSep 7, 2025
What to do if LG 86XE3FS-B Digital Signage operation does not work normally?
- J
  James PalmerSep 8, 2025
  If your LG Digital Signage isn't operating normally, check if the timer is set and review the power control settings. Ensure the circuit breaker is properly connected and switched on (red). If the internal temperature of the enclosure rises, the power may shut down, so regularly clean the heat exchanger and ensure it's installed with proper airflow.

LG 86XE3FS-B Specifications

General

Panel Technology	IPS
Operation Hours	24/7
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 60°C
Standby Power Consumption	0.5W
Screen Size	86 inches
Resolution	3840 x 2160 (4K UHD)
Contrast Ratio	1200:1
Viewing Angle (H x V)	178° x 178°
Response Time	8ms (GtG)
Life Time	50, 000 hours
Orientation	Landscape/Portrait
Input	HDMI
Output	HDMI, Audio
External Control	RS-232C
VESA Mount	600 x 400
Built-in Speaker	Yes
Operating System	webOS
Brightness	500 cd/m²