22
Getting Started
Turning Your Phone On and Off
1. Hold down the
key until the phone switches on.
2. If the phone asks for a PIN, enter the PIN and press
the left soft key [OK]. For further details, see page 66.
The phone searches for your network and after finding
it, the idle screen, illustrated below, appears on the
display. Now, you can make or receive a call.
n
Note
The display language is preset to English at the factory.
To change the language, use the Languages menu option
(Menu 9.1.6). For further details, see page 64.
3. When you wish to switch the phone off, hold down
the
key until the power-off image displays.
Access Codes
You can use the access codes described in this
section to avoid unauthorized use of your phone. The
access codes can be changed by using the Change
Codes feature (Menu 9.4.5).
Security code (4 to 8 digits)
The security code protects the unauthorized use of
your phone. The default security code is set to
‘0000’ and the security code is required to delete all
phone entries and to activate the Restore Factory
Settings menu. The security code default setting can
be modified from the Security Settings menu.
To Next Page
Loading...
