The Horizontal Vane can be adjusted by using the remote controller.
The Vertical Louvers can be adjusted by using the remote controller.
Horizontal Vane Control
Vertical Louver Control
•
Manually moving the Horizontal Vane or Vertical Louvers by hand could damage the mechanism. When the
unit is shut off, the the Horizontal Vane and Vertical Louvers will close the air outlet vent of the product.
• Air conditioner memorizes the last operated angle.
So there is possibility of difference in the angle of remote controller and the unit after reoperation.
In that case, angle can be adjusted by pressing the vane control button on the remote controller.
NOTE
Auto Swing
1. Press the ON/OFF BUTTON to start
the unit.
2. Press the HORIZONTAL VANE
CONTROL BUTTON.
3. The horizontal vane will swing up&down
automatically.
4. To stop the horizontal vane at a desired angle,
press the HORIZONTAL VANE CONTROL
BUTTON again.
Auto Swing
1. Press the ON/OFF BUTTON to start
the unit.
2. Press the VERTICAL LOUVER
CONTROL BUTTON.
3. The vertical louvers will swing left&right
automatically.
4. To stop the vertical louvers at a desired angle,
press the VERTICAL LOUVER CONTROL
BUTTON again.
Room Air Conditioner16
Operating Instructions
To Next Page
Loading...
