LG A12FT - Page 17

17
EN
Auto Operation
(Artificial Intelligence)
Cooling-only models
In this operation mode, the system is
automatically operated by the electronic
controls.
1
Turn the appliance on.
2
Press MODE button repeatedly to select the
Auto Operation.
•
is displayed on the display screen.
NOTE
• In this mode, you cannot adjust the fan speed,
but you can set the air deflector to rotate
automatically.
Auto Changeover Mode
Cooling & Heating Model
This mode changes the mode automatically to
maintain the set temperature at ±2 °C
1
Turn the appliance on.
2
Press MODE button repeatedly to select the
Auto Changeover Mode.
•
is displayed on the display screen.
3
Press or button to set the desired
temperature.
4
Press FAN SPEED button to adjust the fan
speed.
Code Description
2 Cold
1 A little cold
0
Maintain room
temperature
-1 A little hot
-2 Hot