Need help?Do you have a question about the LG AUUH246A and is the answer not in the manual?
General| HSPF | 9.0 |
|---|---|
| Refrigerant | R410A |
| Cooling Capacity | 24000 BTU/h |
| Operating Temperature (Cooling) | 18°C to 46°C |
| Operating Temperature (Heating) | -15°C to 24°C |
| Noise Level (Outdoor) | 52 dB |
Lists available air conditioner models for cooling-only operation.
Lists available air conditioner models for heat pump operation.
Explains the coding system for indoor unit model numbers.
Explains the coding system for outdoor unit model numbers.
Crucial safety instructions to follow during the installation process.
Important safety instructions for operating the air conditioner unit.
Details the benefits of the Gold Fin coating for heat exchanger longevity.
Explains the air purification capabilities of the unit.
Describes the multi-unit control capabilities via wired remote controllers.
Information on automatic restart after power failure and mode changeover.
Details on controlling specific zones and remote operation via telephone.
Overview of the wireless LCD remote for Ceiling & Floor models.
Overview of the wireless LCD remote for Ceiling Cassette models.
Overview of the wireless LCD remote for Concealed Duct models.
Overview of the wired LCD remote for Concealed Duct models.
Detailed technical specifications for cooling-only units across various capacities.
Detailed technical specifications for heat pump units across various capacities.
Provides dimensional drawings for various Ceiling Cassette indoor units.
Provides dimensional drawings for Concealed Duct and Ceiling & Floor indoor units.
Provides dimensional drawings for various outdoor unit models.
Illustrates the internal wiring for different types of indoor units.
Illustrates the internal wiring for different types of outdoor units.
Diagrams showing the refrigerant flow for cooling-only operation.
Diagrams showing the refrigerant flow for heat pump operation.
Provides detailed electrical data organized by unit capacity.
Defines the acceptable inlet air temperature ranges for operation.
Table showing airflow rates at different static pressures for concealed duct units.
Procedure for setting the External Static Pressure on concealed duct models.
Guidelines for selecting the optimal location for indoor unit installation.
Guidelines for selecting outdoor unit location and secure mounting.
Detailed steps for installing various types of indoor units.
Instructions for correctly connecting the electrical wiring to the units.
Instructions for applying heat insulation and forming refrigerant piping.
Procedures for installing drain pipes and testing the drain pump.
Setup procedures for optional features like Two Thermistor System.
Safety and installation steps for the plasma air cleaner accessory.
Component layouts for main PCB assemblies of different unit types.
Detailed electrical schematic diagrams for indoor units.
Detailed electrical schematic diagrams for outdoor units.
Exploded views and part numbers for various indoor units.
Exploded views and part numbers for various outdoor units.
Comprehensive lists of replaceable parts categorized by model number.
To Next Page
