17
- Alarm: Keep ashing until you turn it o or the end of the alarm duration.
- Battery charging: Keep the light on. When the battery is fully charged, the LED switched
o .
• Call: You can set the menu depending on the call.
• Security: This menu allows you to set the phone securely.
> PIN code request - Choose a PIN code to be requested when you turn your phone on.
> Phone lock - Choose a security code to lock your phone, When power on, When SIM
changed or Immediately.
> Call barring - Choose a barring password for all outgoing calls, outgoing international,
outgoing international when roaming, all incoming calls, or incoming when roaming.
> Fixed dial number - Choosing a PIN2 code to enable xed dial number lets you restrict
calls to only those in Contacts.
> Anti-theft mobile tracker - If the handset is stolen, the handset sends the SMS to the
numbers con gured by the real owner. The user must con gure the ATMT settings
with his name, primary phone number, secondary number. The user must set ATMT ON
to activate the ATMT feature. The default ATMT code is “0000”. ATMT SMS will contain
information about the stolen phone IMEI, its current location & the number of the
person who is using the handset.
> Change codes - To change your security code or PIN1 or PIN2 code, or ATMT code, enter
the old code followed by the new one.
• Power save: If you set Always on, you can save the battery power when you are not using
the phone. Choose to switch between power save settings Always on, Night only or O .
• Network selection: You can select a network that will be registered either automatically
or manually.
• Reset settings: Use Reset to restore the factory settings. You need the security code to
activate this function. The default number is “0000”.
• Memory status: You can check the free space and memory usage of each repository.
To Next Page
Loading...
