INSTALLATION AND SETTING
11
ENGLISH
4 If network connection is required from the
controller, connect the Ethernet cable to
LAN port at the backside of the controller
main unit.
5 Connect power adaptor to the power con-
nector located at the backside of the con-
troller main unit.
6 After matching the hook of the wall mount-
ing plate installed on the wall and the
groove of the product, push the product to
match the groove.
When connecting T/B, after removing the
sheath referring to the guide as shown
on the picture, make sure to connect by
inserting a short-protecting sleeve into
the O-ring or U-terminal.
sleeve
O-ring
<Sheath-removal guide>
<Shape of applying to O-ring and sleeve>
<Groove of the prod-
uct>
<Wall-mounting
plate hook>
To Next Page
Loading...
