Air Circulation Operation
During Healthy Dehumidification Operation
o If you select the dehumidification mode on the OPERATION MODE
SELECTION BUTTON, the product starts to run the dehumidification
function. It automatically sets the room temperature and airflow volume to the
best condition for dehumidification, based on the sensed current room
temperature.
In this case, however, the setting temperature is not displayed on the remote
controller and you are not able to control the room temperature either.
o During the healthy dehumidification function, the airflow volume is
automatically set according to the optimization algorithm responding to the
current room temperature status, so that the room condition is kept healthy
and comfortable even in the very humid season.
In this operation mode the actual setting temperature and
the fan speed are automatically set by the electronic control
logic based on the current room temperature. If you feel hot
or cold press the temperature setting buttons respectively for
more cooling or heating effect.
NOTE : You cannot set the actual setting temperature and the indoor fan
speed in this operation mode. But you can use the Chaos swing
in this operation.
If the system is not operating as desired, switch manually to
another mode.
Auto Operation
f
f
f
This operation circulates the air without cooling or heating.
It can be activated by pressing the OPERATION MODE
SELECTION BUTTON. Once the air circulation is activated
you can select the air speed by pressing the INDOOR FAN
SPEED SELECTOR BUTTON.
To Next Page
Loading...
Need help?
General
