LG ARTCOOL Series - Protection Functions and Controls

Part 2 Functions & Controls
- 17 -
Copyright ©2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
4.9 Selection of Heat Logic Option
1) The buzzer sounds 3 times if pressing the tact switch for 10seconds. If turning off the tack switch in this case, the
operation LED flickers and existing/additional heat Logic is toggled.
2) Display of operation LED in selection of heat option.
- When selecting additional heat Logic : Flickering numbers of LED; 1 time
- When selecting existing heat Logic : Flickering numbers of LED; 2 times
3) Setting is selectable regardless of operation status (on/off)
Tact S/W
Buzzer sound
Operation LED
Flickering 4 times
10
sec
ON
OFF
ON
OFF
When selecting additional heat Logic
1.5sec
(1time)
(2times)
When selecting existing heat Logic
0.25sec
0.25*3
sec
1.5sec 1.5sec
1.5sec 1.5sec 1.5 sec
+2°C.
+4°C.
Comp. OFF
INV. Comp.
Frequency
Low
High LowHigh Comp. OFF
Setting
Temp.
Thermo ON
Thermo OFF
Logic 1, Blink 1time
Logic 2, Blink 2time
Thermo OFF
3°C
4°C
Remark
Blow out for Detect to
Room Temp.
Thermo ON
0°C
2°C