LG AUUQ36GH1 - Auto Operation Mode

OWNER'S INSTRUCTION
17
ENGLISH
Auto Operation Mode
1 Press the ON/OFF button.
The unit will respond with beep sound.
2 Press MODE button to select Auto Opera-
tion Mode.
3 Set the desired temperature.
<For Cooling Model>
The temperature and fan speed are auto-
matically set by the electronic controls
based on the actual room temperature.
If you feel hot or cold, press TEMPERA-
TURE SETTING buttons for more cooling
or heating effect.
You cannot switch the indoor fan speed. It
has already been set by the Auto Opera-
tion Mode rule.
Code Feel
2 Cold
1 Slightly cool
0 Neutral
-1 Slightly warm
-2 Warm
❈ Please select the code
depend on your feeling.
During Auto Operation Mode
- If the system is not operating as de-
sired, manually switch to another mode.
The system will not automatically
switch from the cooling mode to the
heating mode, or from heating to cool-
ing, then you must set the mode and
the desired temperature again.